A lightweight jack designed to lift, lower, maneuver and position heavy loads with maximum safety.
Minimum Operator Effort -Full capacity is within the capability of one man. The short lever is lightweight and requires little space for operation.
Easy and Versatile Operation – Operator control is provided by the hexagon key in the operating lever which smoothly controls the release valve. On most jacks the operating lever can be fitted in any one of the three positions in the quadrant to obtain the most suitable operating height. The jacks can be used vertically (on the base) or horizontally (on front face) due to the carefully positioned breather.
Low Clearance – Claw models of most jacks are available for lifting loads with low ground clearance. All jacks used with a claw must be fitted with the extended base option. The load applied to the claw must not exceed the maximum load stated in the specification tables and marked on the claw. A claw should not be used on screwed ram jacks.
Easy to Maintain – The design of the jack makes inspection and component replacement uncomplicated. Main ram seal is changed by simply withdrawing the ram from the top of the jack. Refer to service instructions.
Ready to Use – Hydraclaw jacks are immediately ready to use. No searching for suitable hand pumps with correct oil capacity, changing fittings, replacing damaged hoses or fabricating load support plates as may be necessary when using pumps and cylinders.